Marine & Shipbuilding

Corrosion-resistant pump solutions for ballast, bilge, seawater cooling and fire fighting systems aboard commercial vessels and offshore units.

Commercial vessel at sea

The Challenge

Marine duty combines every difficulty at once. Seawater is continuously corrosive, space in the engine room is severely restricted, and the vessel itself moves — so pumps operate while rolling and pitching, which plays havoc with suction conditions.

Reliability carries a regulatory dimension too. Bilge and fire main systems must function on demand, and equipment is subject to survey by the classification society and flag state. Documentation, traceability and material certification are therefore part of the product, not an optional extra.

Shipyard projects add schedule pressure. Equipment packages must arrive with the correct documentation at a predictable date, since a missing certificate can hold up sea trials.

Our Solution

We specify against the actual seawater chemistry and the vessel's operating profile. Material selection centres on bronze-fitted, duplex or super duplex construction depending on chloride exposure and velocity, with sacrificial anodes and coatings considered where appropriate.

  • Seawater-resistant construction: bronze-fitted, duplex or super duplex options
  • Self-priming configurations for bilge duty where suction lift and variable levels are unavoidable
  • Compact vertical inline designs where engine room space is constrained
  • Ballast pump configurations rated for intermittent high-flow transfer
  • Fire main pumps arranged to start reliably on demand
  • Material certification and traceability prepared for classification review
Typical service range we configure for
ParameterTypical Range
Flow rate10 – 2000 m³/h
Head10 – 150 m
Operating temperatureAmbient to 80 °C
FluidsSeawater, bilge water, fuel oil, fresh water
Ambient conditionSaline, high humidity, vessel motion
Duty cycleIntermittent and standby-on-demand

Typical Duties We Cover

Ballast Water

High-volume transfer for trim and stability control during loading operations.

Bilge & Stripping

Self-priming duty handling oily water mixtures with intermittent operation.

Seawater Cooling

Continuous engine and auxiliary cooling circuits drawing directly from the sea chest.

Fire Main

Standby pumps required to deliver design pressure immediately on demand.

Fuel Oil Transfer

Heated viscous duties where positive displacement may be preferable.

Fresh Water Service

Potable and sanitary water distribution with appropriate trim materials.

Recommended Products

Series most frequently specified for marine service.

FAQ

Can you supply classification society documentation?
We can supply material certifications, test records and dimensional drawings in support of classification review. The specific certificate requirements should be confirmed at enquiry stage so the correct package is prepared with the order rather than requested retrospectively.
Why is self-priming capability important for bilge duty?
Bilge suction levels vary, and pumps often need to restart against an empty or partially drained suction line. A self-priming configuration handles this reliably; a standard centrifugal pump may lose prime and fail to move water when it is most needed.
How does vessel motion affect pump selection?
Rolling and pitching disturb the liquid surface at the suction, effectively reducing available NPSH and increasing air entrainment risk. We account for this by applying additional NPSH margin and favouring configurations tolerant of intermittent gas content.

Working on a Vessel or Shipyard Project?

Send your machinery list and required certifications — we’ll propose suitable units and outline the documentation we can supply.

Request a Configuration