Chemical Process Pumps

Engineered for aggressive, toxic and flammable fluids — with material and sealing configurations selected against your actual fluid analysis.

HUARUI HC series chemical process pump in a processing plant

Overview

The HUARUI HC series is built to ISO 5199 for chemical and petrochemical service. Rather than pushing one standard configuration, we match wetted materials and seal arrangements to the fluid chemistry, temperature and vapour pressure of your duty.

  • Wetted parts in SS316L, Hastelloy C276, duplex or PTFE-lined construction
  • Cartridge mechanical seals with single, double or tandem arrangements
  • Seal support plans (API 682 flush plans) available for hazardous fluids
  • Low-NPSH inducer options for fluids near their boiling point

Technical Specifications

Typical operating envelopes; exact performance confirmed against your duty point and fluid data.

General specifications
Parameter Specification
Flow rateup to 1200 m³/h
Headup to 150 m
Operating pressureup to 16 bar (PN16) / PN25 on request
Operating temperature-40°C to +180°C (higher on request)
Casing materialSS304, SS316L, Hastelloy C276, PTFE-lined ductile iron
Impeller materialSS316L, Hastelloy C276, PTFE
SealingSingle / double / tandem cartridge mechanical seal
Suction outlet size25 mm – 300 mm
StandardsISO 5199 / ISO 2858 / API 682 seal plans

Applications

Typical services where this series is specified.

Chemical Processing

Acid, alkali and solvent transfer across process plants.

Explore this application →

Petrochemical

Hydrocarbon streams, condensers and intermediate transfer.

Pharmaceutical

High-purity transfer with hygienic material finishes.

Water Treatment

Dosing of oxidants, coagulants and pH adjustment chemicals.

FAQ

How do I choose the right wetted material?
Material selection starts from the fluid composition, concentration and temperature. SS316L covers many inorganic chemicals; Hastelloy C276 is used for mixed acids and chloride-bearing media; PTFE-lined construction handles aggressive acids where metallic options fail. Send us your fluid analysis and we will recommend a tested combination.
Do you support double mechanical seals and seal plans?
Yes. For toxic, flammable or crystallising fluids we supply seal arrangements specified per plan 11 / plan 21 / plan 52 / plan 53 configurations, with barrier fluid reservoirs and instrumentation where required.
Can you handle low-NPSH applications?
Yes. For fluids close to their vapour pressure we offer inducers, enlarged suction impeller eyes and vertical inline sump configurations to reduce the required NPSH margin.

Discuss Your Fluid Duty

Share your fluid analysis and operating conditions — we return a material and seal recommendation with quote.